R12IB3S-PCM2AC-POE 12.1" Intel® Celeron® N2930 S Series HMI Panel PC
- 12.1” 1024 x 768 Resolution with Projected Capacitive MultiTouch (PCAP)
- Fanless cooling system and ultralow power consumption
- Support PoE function
- Optional 2MP Front Camera
- Optional HF RFID Reader
- Stylish design for room booking, access control, and room information applications
- Front IP65 Water and Dust Proof
Power over Ethernet (Data and Power connections in a single cable)
The hardware installation becomes easier with Power over Ethernet. PoE reduces the number of cables needed for the connection of various devices. This infrastructure allows for centralized power management; therefore, it is a cost-effective solution for access control, home, and industrial automation.
Winmate’s S-series HMIis 35% thinner than a traditional Panel PC. With the slim design, it has an aesthetically pleasing look that fits modern interiors and exteriors. Its true flat surface is not only for a stylish look but easy to maintain and clean. No more clogged dust on the edges.
P-Cap Touch (Resistant to scratches)
The glass cover lens provides great protection from scratches. P-Cap Touch supports 4-point multi-touch and can easily be controlled by fingers. This technology allows enjoying every touch and improving the convenience of using the device. Thus, it helps to enhance the overall customer experience.
LED Light Bar (Indicates the status of the machine or process afar) and HF RFID/NFC (Limited Access Control)
LED Light Bar is designed to control the status of the running processes afar, yet saving energy by keeping a display turned off. The settings are easily programmable according to your preferences. Choose one of the four colors - red, green, blue, or orange to send valuable messages based on your settings. Also, HF RFID/NFC helps to limit the access to only the personnel in charge. Greater control for security purposes is now available with S-Series HMI.
Front IP65 (Water and Dust Proof)
Don't worry whether somebody split the coffee over S-Series HMI, or if the raindrops reach the device! This HMI is sealed with IP65 on the front side and is protected against possible damages from outer dust and water splash.
Touch / Glass
Projected Capacitive Multi Touch Screen
Intel Celeron N2930 1.83GHz (up to 2.16GHz)
1 x SO-DIMM, DDR3L 1600 MHz, 4GB 8GB (Optional)
1 x M.2 2242 B-key SSD 128GB. M.2 2242 B-key SSD up to 512GB. (Optional)
2 x Intel® Ethernet Controller
Windows 10 IoT Enterprise (64 bit) (Optional) Linux Ubuntu 20.04 (Optional)
HF RFID Reader 13.56 MHz (Optional)
Built-in RGB LED Status Light Bar, on both sides
296 x 227 x 46 mm
Panel mount VESA Mount
10% to 90% RH, Non-Condensing
0°C to 50°C
-10°C to 60°C
1 x USB3.2 Gen1x1 (Type-A) 1 x USB2.0 (Type-A)
1 x RS232/422/485 (Default RS232)
2 x Giga LAN RJ45 Connector, One with PoE(PD, 802.3at)(Optional)
1 x Speaker
2 x M.2 slot(1 for WiFi, 1 for SSD)
1 x 12V DC, 3-Pin Terminal Block
100~240V AC to DC Adapter Power Cord Terminal Block to 2.5Ø Female Adapter Cable Open Wire Cable with terminal block connector VESA screws
VESA Wall Mount (Optional) VESA Desk Stand (Optional) Glass Wall Mount Kit (Optional) Front Side Wall Mount (Optional) VESA bracket mounting kit (Optional)
12V DC 10~60V (Optional)
PoE (PD): follows IEEE 802.3at (25 W)