R12FA3S-PCM2AC-POE 12.1" NXP i.MX6 S Series HMI Panel PC
KEY FEATURES
- 12.1” 1024 x 768 Resolution with Projected Capacitive MultiTouch (PCAP)
- Fanless cooling system and ultralow power consumption
- Support PoE function
- Optional 2MP Front Camera
- Optional HF RFID Reader
- Stylish design for room booking, access control, and room information applications
- Front IP65 Water and Dust Proof
- CERTIFICATIONS
-
Power over Ethernet (Data and Power connections in a single cable)
The hardware installation becomes easier with Power over Ethernet. PoE reduces the number of cables needed for the connection of various devices. This infrastructure allows for centralized power management; therefore, it is a cost-effective solution for access control, home, and industrial automation.
Stylish Design
Winmate’s S-series HMIis 35% thinner than a traditional Panel PC. With the slim design, it has an aesthetically pleasing look that fits modern interiors and exteriors. Its true flat surface is not only for a stylish look but easy to maintain and clean. No more clogged dust on the edges.
P-Cap Touch (Resistant to scratches)
The glass cover lens provides great protection from scratches. P-Cap Touch supports 4-point multi-touch and can easily be controlled by fingers. This technology allows enjoying every touch and improving the convenience of using the device. Thus, it helps to enhance the overall customer experience.
LED Light Bar (Indicates the status of the machine or process afar) and HF RFID/NFC (Limited Access Control)
LED Light Bar is designed to control the status of the running processes afar, yet saving energy by keeping a display turned off. The settings are easily programmable according to your preferences. Choose one of the four colors - red, green, blue, or orange to send valuable messages based on your settings. Also, HF RFID/NFC helps to limit the access to only the personnel in charge. Greater control for security purposes is now available with S-Series HMI.
Front IP65 (Water and Dust Proof)
Don't worry whether somebody split the coffee over S-Series HMI, or if the raindrops reach the device! This HMI is sealed with IP65 on the front side and is protected against possible damages from outer dust and water splash.
Size
12.1 inches
Touch / Glass
Projected Capacitive Multi Touch Screen
Resolution
1024x768
Panel Brightness
500.0 nits
Contrast Ratio
1000:1
View Angles
89,89,89,89
Active Area
245.76x184.32 mm
Processor
NXP i.MX6 Dual Core, 1.0GHz
Memory
1GB 2GB (Optional)
Storage
eMMC: Onboard 16 GB eMMC: Onboard 32 GB (Optional)
Operating System
Linux Ubuntu 18.04 (Optional) Android 6.0 (Optional) Debian 7.0 (Optional) Linux 4.1.15 QT 5.5 (Optional)
WLAN
Support (Optional)
BT
Support (Optional)
RFID
HF RFID Reader 13.56 MHz (Optional)
Light Bar
Built-in RGB LED Status Light Bar, on both sides
Dimension
296 x 227 x 46 mm
Cut out
282x207mm
Weight
3.0 kg
Mounting
Wall mount VESA mount (Optional)
Enclosure
Metal Housing
Cooling System
Fanless Design
Operating Humidity
10% to 90% RH, Non-Condensing
Operating Temperature
0°C to 50°C
Storage Temperature
-10°C to 60°C
IP rating
Front IP65
Certification
CE, FCC
USB Port
1 x Console Port (Mini USB) 1 x USB OTG 1 x USB2.0 (Type-A)
Serial Port
1 x RS232/422/485 (Default RS232)
LAN
1 x LAN RJ45 Connector with PoE(PD, 802.3 at)
Video
1 x Micro HDMI (Optional)
Audio
1 x Speaker
SD Card Slot
1 x Micro SD card slot
Expansion Port
1 x mPCIe slot(for Wi-Fi module)
CANBUS
1 x CANBUS, D-sub9
Power Input
1 x 12V DC, 2-Pin Terminal Block
Accessory
100~240V AC to DC Adapter Power Cord Terminal Block to 2.5Ø Female Adapter Cable Open Wire Cable with terminal block connector VESA screws
Optional Accessory
VESA Desk Stand (9B0000000412) (Optional)
Power Rating
12V DC
Adapter
12V 50W
POE
PoE (PD): follows IEEE 802.3at (25 W)