Panel/Flush Mount

Assembly Diagram
Panel PC and Display 5.7" ~ 32" .
M series ATEX C1D2 Panel PC 17”~23.8”

Panel / Flush Mounting Kit
A set of Panel / Flush Mounting Kit is composed of a clamp and screw.

Winmate Mounting Kit

Installation Steps

Step 1
Make a cutout on the fixture (ex. wall) according to the cutout dimension of the Panel PC.
Note: All installation processes are done from the rear side of the fixture.

Step 2
Place the Panel PC on the fixture from the front side. The sides of the bezel should be visible from outside.

Step 3
Use the mounting kit provided by Winmate to secure the Panel PC to the fixture. First, install the mounting clamp to the Panel PC, and then fasten the screw to fix the clamp to the fixture.

Step 4
Installation complete.