Front Side Wall Mount

Assembly Diagram
Panel PC and Display 5.7" ~ 17"

Front Side Mounting Kit

A set of Front Side Mounting Kit is composed of a striker and a roller catcher. The striker is located on the four sides of front bezel. The roller catcher is fixed on the front housing. When combining the front bezel with the open frame housing strikers will be locked into the roller catches.

Installation Step

Step 1
Make a cutout on the fixture (ex. wall) according to the cutout dimension of the iron box.
Note: All installation processes are done from the front side of the fixture.

Step 2
Use VESA Mount Kit (not supplied by Winmate) to fix the iron box to the fixture.

Step 3
Insert the Panel PC into the iron box. Make sure that strikers on the rear side of the Panel PC match catch on the front side of the iron box.

Step 4
Installation complete.

Replacing the Panel PC

If you want to replace the Panel PC, it is easy and convenient to do it yourself. Just pull the old Panel PC out of the iron box and insert the new one.