R12RK3S-PCM2-POE12.1" ARM A72+A53 S Series HMI Panel PC
The R12RK3S-PCM2-POE has been phased out and replaced by the R12IM3S-PCM2AC-POE. For more information, please get in touch with us.
- 12.1” 1024 x 768 Resolution with Projected Capacitive MultiTouch (PCAP)
- Fanless cooling system and ultralow power consumption
- Support PoE function
- Optional 2MP Front Camera
- Optional HF RFID Reader
- Stylish design for room booking, access control, and room information applications
- Front IP65 Water and Dust Proof
12.1" ARM A72+A53 S Series HMI Panel PC
Power over Ethernet (Data and Power connections in a single cable)
The hardware installation becomes easier with Power over Ethernet. PoE reduces the number of cables needed for the connection of various devices. This infrastructure allows for centralized power management; therefore, it is a cost-effective solution for access control, home, and industrial automation.
Winmate’s S-series HMIis 35% thinner than a traditional Panel PC. With the slim design, it has an aesthetically pleasing look that fits modern interiors and exteriors. Its true flat surface is not only for a stylish look but easy to maintain and clean. No more clogged dust on the edges.
P-Cap Touch (Resistant to scratches)
The glass cover lens provides great protection from scratches. P-Cap Touch supports 4-point multi-touch and can easily be controlled by fingers. This technology allows enjoying every touch and improving the convenience of using the device. Thus, it helps to enhance the overall customer experience.
Front IP65 (Water and Dust Proof)
Don't worry whether somebody split the coffee over S-Series HMI, or if the raindrops reach the device! This HMI is sealed with IP65 on the front side and is protected against possible damages from outer dust and water splash.
Touch / Glass
Projected Capacitive Multi Touch Screen
245.76 x 184.32 mm
ARM A72 (up to 2.0 GHz) + ARM A53 (up to 1.5 GHz)
2GB LPDDR3L 1600 4GB (Optional)
Onboard 16GB eMMC Onboard 32GB eMMC (Optional) Mico SD Card SDHC (Optional)
HF RFID Reader 13.56 MHz (Optional)
296 x 227 x 46 mm
Panel mount VESA Mount
10% to 90% (non-condensing)
1 x USB3.0 (Type-A) 1 x USB2.0 (Type-A) 1 x USB OTG
1 x RS232/422/485 (Default RS232)
1 x LAN RJ45 Connector with PoE(PD, 802.3 at)
1 x Micro HDMI (Optional)
1 x Speaker
SD Card Slot
1 x Micro SD card slot
2 x M.2 slot(1 for WiFi, 1 for SSD)
1 x 12V DC, 3-Pin Terminal Block
100~240V AC to DC Adapter Power Cord Terminal Block to 2.5Ø Female Adapter Cable Open Wire Cable with terminal block connector Manual VESA screws
PoE (PD): follows IEEE 802.3at (25 W)